Q: How much does the
Tree-Lounge weigh?
A: 18.6 pounds
Back To
Questions
Q: How much does the Foot
Climber weigh?
A: 7.3 pounds
Back To
Questions
Q: How Much does the Bow
Hunting Adapter Weigh?
A: 5.65 pounds
Back To
Questions
Q: What is the weight capacity
of the Tree-Lounge?
A: 300 pounds
Back To
Questions
Q: How can I
order replacement parts?
A:
Replacement parts may be
ordered from this site by
clicking here.
Back To
Questions
Q: What size tree will the
Tree-Lounge fit on?
A: It fits any tree between 8
and 18 inches in diameter.
Back To
Questions
Q: Is the Tree-Lounge painted?
A: No, the new Tree-Lounge is
powder coated. No painting is
necessary!
Back To
Questions
Q: What color is the new
Tree-Lounge?
A: Tree-Lounge Green.
Back To
Questions
Q: How long does it take to
receive merchandise after you
order?
A: It will take approximately
7 to 10 business days for
delivery.
Back To
Questions
Q: What is the Tree-Lounge
made of?
A: The Tree-Lounge is made of
6005 T6 Aluminum alloy.
Back To
Questions
Q: What is the platform on the
Bow Hunting Adapter made of?
A: The Bow Hunting Adapter is
made of an aluminum frame with
steel rivets.
Back To
Questions
Q: What is the seat on the
Tree-Lounge made of?
A: The seat is made of the
same material that is on
trampolines.
Back To
Questions
Q: How wide is the Tree-Lounge
where you sit?
A: The width on the
Tree-Lounge is 20 1/2 inches.
Back To
Questions
Q: What is the Length of the
Tree-Lounge?
A: The total length of the
Tree-Lounge fully extended is
75 3/4 inches.
Back To
Questions
Q: What keeps the section from
sliding apart?
A: Each section of the
Tree-Lounge has welded stops
inside to keep each section
from sliding out.
Back To
Questions
Q: How does the Tree-Lounge
fold up, and what is the size
when it's folded up?
A: The sections telescope
together. Next, you put your
Tree-Lounge Backbrace through
the carrying straps and attach
it to the last hole of the
Tree-Lounge. Then you attach
your Foot Climber Backbrace to
the next to the last hole on
your Foot Climber and attach it
to the Tree-Lounge using a
Bungee Cord making sure you
securing it tightly so it
doesn't make any noise while
carrying. If you have a
Bow Hunting Adapter, you will
fold it up between the
Tree-Lounge and Foot Climber
and use your extra bungee cord
that came with the Bow Hunting
Adapter to secure it tightly.
Finish by using the other
bungee cord and secure entire
unit snugly. The size of the
Tree-Lounge when folded will
be 23" x 33 1/8".
Back To
Questions
Q: Can the Tree-Lounge hold
someone who weighs over 300
pounds?
A: Our weight limit is 300
pounds due to liability
reasons. We cannot advise
anyone over 300 pounds to use
the Tree-Lounge.
Back To
Questions
Q: How do the Wheels attach to
the Tree-Lounge?
A: The Wheels mount onto the
Tree-Lounge using the same
holes as your Backbrace.
Back To
Questions
Q: Are the Tree-Lounge pads
waterproof?
A: No, the pads are made of
polyester cotton twill and are
not waterproof.
Back To
Questions
Q: How long have you been in
business?
A: We have been selling the
Tree-Lounge since 1980.
Back To
Questions
Q: Can you carry the
Tree-Lounge with the Tree Nest
attached in the seat?
A: It depends on the person,
most people find it will be
too bulky with the Tree Nest
in the seat. It will most
likely be more comfortable
with the Tree Nest tied on the
back of the unit when
carrying.
Back To
Questions
Q: How long does it take to
receive a catalog or video?
A: Since we mail these items
bulk rate through the Postal
Service it usually takes 2
weeks to be received.
Back To
Questions
Q: Is the Tree-Lounge noisy
while carrying through the
woods?
A: If you follow the
instructions on how to
assemble the Tree-Lounge for
carrying, the noise will be
minimal.
Back To
Questions
Q: What is the cinch strap
used for?
A: The cinch strap is used for
two functions: (1) When a
hunter reaches his desired
climbing height, attach the S
hook into the end of the
siderails and hook the other S
hook into the other siderail.
Pull the strap until it fits
to the tree. This will prevent
the Tree-Lounge from slipping
down the tree while turning
around. (2) Holding the foot
climber and Tree-Lounge
together while carrying.
Back To
Questions
Q: What are the foot rest
control knobs used for?
A: When carrying, these knobs
prevent the foot rest from
rattling. When climbing, it
prevents the footrest from
telescoping out. When in
hunting position, it keeps the
hunter from lifting up with
their feet on the foot rest.
Back To
Questions
Q: What is the climbing pin
used for?
A: When climbing this prevents
the Tree-Lounge from
telescoping out, making
climbing much easier.
Back To
Questions
Q: Will all of the old
accessories fit the new
Tree-Lounge?
A: Yes, the only exception is
the gun holder and it requires
only a slight modification.
You will have to drill a 3/8
inch hole in one gun holder to
adapt it for mounting on the
new stand.
Back To
Questions
Q: How much
will Shipping cost?
A: For our standard shipping
costs, please click
here. If you are located
outside of the Continental
United States, or prefer a
shipping method other than UPS
Ground, please
contact
us for rates.
Back To
Questions
Q: Why was
the Leveler Recalled?
The Tree-Lounge Leveler was
recalled because in some
cases people were putting
the Leveler onto the bottom
of the side rails instead of
on the top of the side rails
causing the aluminum to
split around the bolt holes.
In all cases the leveler did
not break or the stand did
not release from the tree.
CESSO (the previous owners)
voluntarily contacted the
Consumer Product Safety
Commission and issued the
recall in concern for
customer safety. If you have
a Leveler you can call (800)
233-0459 and we will send
you a free UPS return
shipping label for you to
send your leveler back to
have the back brace
reinforced to address all
safety concerns.
Tree-Lounge, LLC (the
current owners) have
developed a great new
product to replace the Lever
called the ANGLE ADJUSTER.
It uses a 1-inch and 2-inch
slide block to adjust the
angle of your stand. To
learn more go to the
Tree-Lounge Angle Adjuster
or the Foot Climber Angle
Adjuster page in the “Shop
On Line” section of this web
site.
Back To
Questions
Q: Why does
the Angle Adjuster come with
a back brace when I already
have the one that came with
the stand?
The Tree-Lounge Angle
Adjuster and the Foot
Climber Angle Adjusters come
with a back brace because
there have been 3 different
models of back braces
(D-Shaped, H-Shaped &
Rectangle shaped). The angle
adjusters work only with the
Rectangle Shaped back
braces. If you would like to
order just the angle
adjuster blocks without the
back brace you can call
customer service @ (800)
233-0459 and we can qualify
your stand to assure that
the angle adjusters will
work with your Tree Lounge
model back brace.
Back To
Questions
Q: Why did
you change the design on the
lightweight Tree Lounge back
to the rectangle shape
Tree-Lounge?
Bob Hice, the inventor of
the Tree Lounge, designed
the Tree Lounge in 1980 and
was using a rectangular
shaped aluminum through 1999
when he sold the company to
CESSO,LLC. In 1999 CESSO
redesigned the stand to make
it lighter using a D-shaped
aluminum. In 2003 Bob bought
the company back. At that
time he decided that he
liked his original design
better. Bob decided that he
would design the ultimate
Tree Lounge by using his
original design and adding
the new features that CESSO
had come up with such as
powder coating, climbing
pin, foot rest control
knobs, cinch strap and
rounded corners. We strongly
believe that we are now
producing the best Tree
Lounge ever!
Back To
Questions
|
